Hyundai Kona: FCA warning message and system control / Brake operation
- In an urgent situation, the braking system enters into the ready status for prompt reaction against the driver's depressing the brake pedal.
- The FCA provides additional braking power for optimum braking performance, when the driver depresses the brake pedal.
- The braking control is automatically deactivated, when the driver sharply depresses the accelerator pedal, or when the driver abruptly operates the steering wheel.
- The FCA brake control is automatically canceled, when risk factors disappear.
CAUTION
The driver should always use extreme caution while operating the vehicle, whether or not there is a warning message or alarm from the FCA system.
WARNING
The braking control cannot completely stop the vehicle nor avoid all collisions. The driver should hold the responsibility to safely drive and control the vehicle.
WARNING
The FCA system logic operates within certain parameters, such as the distance from the vehicle or pedestrian ahead, the speed of the vehicle ahead, and the driver's vehicle speed. Certain conditions such as inclement weather and road conditions may affect the operation of the FCA system.
WARNING
Never deliberately drive dangerously to activate the system.
Emergency braking (Second warning)
This warning message appears on the LCD display with a warning chime.
Additionally, some vehicle system intervention occurs by the engine management
system to help decelerate the vehicle.
- The FCA ...
FCA sensor
In order for the FCA system to operate properly, always make sure the sensor
cover or sensor is clean and free of dirt, snow, and debris.
Dirt, snow, or foreign substances on the lens may adversely ...
Other information:
Hyundai Kona (OS) 2018-2021 Service Manual: Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad")
3.
Remove the steering column uppe ...
Hyundai Kona (OS) 2018-2021 Service Manual: Gear Actuator Assembly Repair procedures
Removal
1.
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air Cleaner")
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
...