Hyundai Kona: Forward Collision-avoidance Assist (FCA) system-sensor fusion type (Front radar + Front camera) / FCA sensor

In order for the FCA system to operate properly, always make sure the sensor cover or sensor is clean and free of dirt, snow, and debris.

Dirt, snow, or foreign substances on the lens may adversely affect the sensing performance of the sensor.

NOTICE

NOTICE

Information

We recommend that you have the system checked by an authorized HYUNDAI dealer when:

Brake operation
In an urgent situation, the braking system enters into the ready status for prompt reaction against the driver's depressing the brake pedal. The FCA provides additional braking power for optimum ...

Warning message and warning light
Forward Collision Avoidance Assist (FCA) system disabled. Radar blocked When the sensor cover is blocked with dirt, snow, or debris, the FCA system operation may stop temporarily. If this occurs, a ...

Other information:

Hyundai Kona (OS) 2018-2019 Owners Manual: Operating conditions
To operate: Press the BCW switch with the Ignition switch in the ON position. The indicator on the BCW switch will illuminate. When the vehicle speed exceeds 30 km/h (20 mph), the system will be activated. To cancel: Press the BCW switch again. The indicator on the switch will go off. When the sys ...

Hyundai Kona (OS) 2018-2019 Service Manual: Fuel Pressure Control Valve (FPCV) Repair procedures
Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. 3. Measure resistance between the fuel pressure regulato ...

© 2018-2019 www.hkona.com