Hyundai Kona: Repair procedures / Seat Belt Buckle Switch (BS) Repair procedures

Removal

1.	Disconnect the battery negative cable, and wait for at least three minutes before beginning work.

2.	Remove the front seat assembly. (Refer to Body - "Front Seat Assembly")

3.	Remove the seat belt buckle switch (A) after loosening the seat belt buckle mounting bolt.

Installation

•	Be sure to install the harness wires so they will not pinch or interfere with other parts.

1.	Remove the ignition key from the vehicle.

2.	Disconnect the battery negative cable, and wait for at least three minutes before beginning work.

3.	Install the seat belt buckle switch.

4.	Install the front seat assembly. (Refer to Body - "Front Seat Assembly")

5.	Reconnect the battery negative cable.

6.	After installing the seat belt buckle switch, confirm proper system operation.

Description • The SRSCM should detect the condition of seat belt buckles (BS) of the driver and passenger seats. • The SRSCM pro ...

...

Hyundai Kona (OS) 2018-2025 Service Manual: Alternator Specifications
Specification ltem Specification Nominal output 13.5V, 130A Speed in use 1,000 - 18,000 rpm Voltage regulator IC Regulator built in type Regulator Setting Vo ...

Hyundai Kona (OS) 2018-2025 Service Manual: Accelerator Pedal Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). 3. Remove the installation nuts (A) and then re ...