Hyundai Kona: Repair procedures / Seat Belt Buckle Switch (BS) Description and operation

Hyundai Kona (OS) 2018-2026 Service Manual / Restraint / Repair procedures / Seat Belt Buckle Switch (BS) Description and operation

Description
•
The SRSCM should detect the condition of seat belt buckles (BS) of the driver and passenger seats.
•
The SRSCM provides two pins to each side, in order to enter the condition of seat belt buckles (BS) of the driver and passenger seats.
•
The seat belt buckle circuit is operated using internal boost voltage supplied by the SRSCM, and uses body ground for signal return.
Seat Belt Buckle Switch (BS) Components and components location
Components 1. Seat Belt Buckle Switch (BS) ...

Seat Belt Buckle Switch (BS) Repair procedures
Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front seat ...

Other information:

Hyundai Kona (OS) 2018-2026 Owners Manual: Warning message and warning light
Forward Collision Avoidance Assist (FCA) system disabled. Radar blocked When the sensor cover is blocked with dirt, snow, or debris, the FCA system operation may stop temporarily. If this occurs, a warning message will appear on the LCD display. Remove any dirt, snow, or debris and clean the radar ...

Hyundai Kona (OS) 2018-2026 Owners Manual: System setting and activation
System setting The Driver Attention Warning (DAW) system is set to be in the OFF position, when your vehicle is first delivered to you from the factory. To turn ON the Driver Attention Warning (DAW) system, turn on the engine, and then select "User Settings Driver Assistance Driver Attention ...

© 2018-2026 www.hkona.com