Hyundai Kona: Repair procedures / Seat Belt Buckle Switch (BS) Components and components location

Hyundai Kona (OS) 2018-2019 Service Manual / Restraint / Repair procedures / Seat Belt Buckle Switch (BS) Components and components location

Components

1. Seat Belt Buckle Switch (BS)


Side Impact Sensor (SIS) Repair procedures
Removal Pressure Side Impact Sensor    • Removal of the airbag must be performed acc ...

Seat Belt Buckle Switch (BS) Description and operation
Description • The SRSCM should detect the condition of seat belt buckles (BS) of the driver and passenger seats. • The SRSCM pro ...

Other information:

Hyundai Kona (OS) 2018-2019 Service Manual: Temperature Control Actuator Description and operation
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the tempe ...

Hyundai Kona (OS) 2018-2019 Service Manual: Heated Oxygen Sensor (HO2S) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 2 and 5 [B1/S1]. 4. Measure resistance between the HO2 ...

© 2018-2019 www.hkona.com