Hyundai Kona: Engine and Transaxle Assembly / Engine Cover Repair procedures

Removal and Installation
1.
Remove the engine cover (A).

  
Remove the engine cover on room temperature.
Do not disengage both front and rear mounting point at the same time.
2.
Install in the reverse order of removal.
Engine and Transaxle Assembly
...

Engine Room Under Cover Repair procedures
Removal and Installation 1. Loosen the mounting clip and bolt and then remove the under cover (A). Tightening torque : 3.9 - 5.9 ...

Other information:

Hyundai Kona (OS) 2018-2023 Service Manual: Electric WGT Control Actuator Description and operation
Desrcription The Electric WGT Control Actuator is installed on the turbocharger. It operates the vain in the Waste Gate Turbocharger (WGT) and regulates the compressed air amount by the ECM's PWM signal. This actuator consists of a DC motor which actuates the vane, a 2-s ...

Hyundai Kona (OS) 2018-2023 Service Manual: Intake Manifold Components and components location
Components 1. Intake manifold assembly 2. Intake manifold gasket 3. Electronic throttle body gasket 4. Electronic throttle body 5. Purge control solenoid valve (PCSV) ...

© 2018-2023 www.hkona.com