Hyundai Kona: Exterior care / Finish damage repair
Deep scratches or stone chips in the painted surface must be repaired promptly. Exposed metal will quickly rust and may develop into a major repair expense.
NOTICE
If your vehicle is damaged and requires any metal repair or replacement, be sure the body shop applies anti-corrosion materials to the parts repaired or replaced.
Finish maintenance
Washing
To help protect your vehicle’s finish from rust and deterioration, wash it thoroughly
and frequently at least once a month with lukewarm or cold water.
If you use your vehicle for off-road ...
Bright-metal maintenance
To remove road tar and insects, use a tar remover, not a scraper or other
sharp object.
To protect the surfaces of brightmetal parts from corrosion, apply a coating
of wax or chrome preservativ ...
Other information:
Hyundai Kona (OS) 2018-2026 Service Manual: Intercooler Repair procedures
Removal and Installation
1.
Disconnect the battery negative terminal.
2.
Remove the engine cover.
(Refer to Engine and Transaxle Assembly - "Engine Cover")
3.
Remove the engine room under cove ...
Hyundai Kona (OS) 2018-2026 Service Manual: Input shaft speed sensor 1 Description and operation
Description
•
Components location : DCT (Dual Clutch Transmission)
•
Function
The input shaft speed sensor is important in that it detects the input
shaft RPM and sends this information to the Transmission Contr ...
