Hyundai Kona: Front Door / Front Door Inside Handle Repair procedures

Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
After loosening the mounting screws, remove the front door inside handle (A).

3.
To install, reverse removal procedure.
  
•
Make sure the door locks / unlocks and opens / closes properly.
•
Replace any damaged clips (or pin-type retainers).
Front Door Trim Repair procedures
Replacement    • Put on gloves to prevent hand injuries. ...

Front Door Window Glass Components and components location
Component Location 1. Front door window glass ...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: Thermostat Repair procedures
Removal    • Disassembly of the thermostat would have an adverse effect, causing a lowering of cooling efficiency. 1. Drain engine coolan ...

Hyundai Kona (OS) 2018-2026 Service Manual: Clutch Engagement Fork and Engagement Bearing Repair procedures
Removal 1. Remove the dual clutch assembly. (Refer to Dual Clutch System - "Dual Clutch Assembly") 2. Remove the clutch engagement bearing 1 (B) and 2 (A). 3. Remove the clutch engagem ...

© 2018-2026 www.hkona.com