Hyundai Kona: Front Door / Front Door Power Window Regulator Repair procedures

Hyundai Kona (OS) 2018-2026 Service Manual / Body (Interior and Exterior) / Front Door / Front Door Power Window Regulator Repair procedures

Replacement

1.	Remove the front door window glass. (Refer to Front Door - "Front Door Window Glass")

2.	Disconnect the front door power window motor connector (A).

Loosen the front door power window regulator mounting nuts.

Tightening torque :

3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)

4.	Remove the front door power window regulator assembly (A).

To install, reverse removal procedure.

•	Make sure connectors are connected properly and each rod is connected securely.

•	Make sure the door locks / unlocks and opens / closes properly.

Front Door Power Window Regulator Components and components location

Component Location 1. Front door power window regulator ...

Front Door Outside Handle Components and components location

Component Location 1. Front door outside handle ...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: General information
Tightening Torque Table of Standard Parts BOLT (Nominal diameter) NUT (Nominal diameter) BOLT/NUT Normal screw Torque Nm (kg.m, Ib-ft) Nominal diameter. ...

Hyundai Kona (OS) 2018-2026 Owners Manual: Scheduled maintenance services
Follow Normal Maintenance Schedule if the vehicle is usually operated where none of the following conditions apply. If any of the following conditions apply, you must follow the Maintenance Under Severe Usage Conditions. Repeated driving short distance of less than 8 km (5 miles) in normal tem ...