Hyundai Kona: Lighting System / Front Fog Lamps Repair procedures

Removal

[Front Fog Lamp]

1.	Disconnect the negative (-) battery terminal.

2.	Remove the front bumper. (Refer to Body - "Front Bumper Cover")

3.	Disconnect the front fog lamp connector.

4.	Remove the front fog lamp assembly after loosening the mounting screws.

5.	Remove the fog lamp bulb.

Installation

[Front Fog Lamp]

1.	Install the front fog lamp assembly.

2.	Connect the front fog lamp connector.

3.	Install the front bumper.

4.	Connect the negative (-) battery terminal.

Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Bod ...

Removal LHD 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bubper. (Refer to Body ...

Hyundai Kona (OS) 2018-2026 Service Manual: Knock Sensor (KS) Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the intake manifold (Refer to Engine Mechanical System - "Intake Manifold") 3. Remove th ...

Hyundai Kona (OS) 2018-2026 Service Manual: ETC (Electronic Throttle Control) System Repair procedures
Inspection Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T. Specification : Refer t ...