Hyundai Kona: Timing System / Front Oil Seal Repair procedures

Removal and Installation
1.
Crankshaft damper pulley.
(Refer to Timing System - "Damper Pulley")
2.
Remove the front oil seal (A).

3.
Install the front oil seal.
  
•
Using the SST (09455-21200) (A), reassemble the front oil seal.

  
•
Do not reuse the front oil seal.
Front Oil Seal Components and components location
Components 1. Front oil seal ...

Timing Chain Cover & Oil Pump Assembly Components and components location
Components 1. Timing chain cover & Oil pump assembly ...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: Passenger Airbag (PAB) Module Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the glove box housing. (Refer to Body - "Glove Box Upper Cover Assembly") 3. ...

Hyundai Kona (OS) 2018-2026 Service Manual: Rear Coil Spring Repair procedures
Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wheel and tire (A) from front hub. Tightening torque : 107.9 - 127.5 N ...

© 2018-2026 www.hkona.com