Replacement |
1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
|
2. |
Disconnect the front seat belt buckle connector wiring (A).
|
3. |
After loosening the mounting bolt, then remove the front seat belt buckle
(A).
|
4. |
To install, reverse removal procedure.
|
Hyundai Kona (OS) 2018-2021 Service Manual: Description and operation
Description
Body Control Module (BCM) function
No
Item
Description
1
Washer Linked Wiper
–
If the washer switch is pressed ON for 0.06-0 ...
Hyundai Kona (OS) 2018-2021 Service Manual: Rear Wheel Speed Sensor Repair procedures
Removal
[Tortion Beam Axle Type]
1.
Turn the ignition switch OFF and then disconnect the negative (-) battery
cable.
2.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
...