Hyundai Kona: Fuel Delivery System / Fuel Pressure Sensor (FPS) Specifications

Hyundai Kona (OS) 2018-2026 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Pressure Sensor (FPS) Specifications

Specification

Pressure [kPa (kgf/cm², psi)]	Output Voltage (V)
50 (0.51, 7.3)	0.3
600 (6.12, 87.0)	2.5
1100 (11.2, 159.5)	4.5

Fuel Pressure Sensor (FPS) Description and operation

Description The fuel pressure sensor (FPS) is installed on the top of the low pressure fuel pump and measures the pressure in the low pressure fuel line.Based on the fuel pressur ...

Fuel Pressure Sensor (FPS) Schematic diagrams

Circuit Diagram Terminal Illustration Terminal Function No Function Connected to 1 F ...

Other information:

Hyundai Kona (OS) 2018-2026 Owners Manual: FCA sensor
In order for the FCA system to operate properly, always make sure the sensor cover or sensor is clean and free of dirt, snow, and debris. Dirt, snow, or foreign substances on the lens may adversely affect the sensing performance of the sensor. NOTICE Do not apply license plate molding or foreig ...

Hyundai Kona (OS) 2018-2026 Owners Manual: Jump starting procedure
1. Position the vehicles close enough that the jumper cables will reach, but do not allow the vehicles to touch. 2. Avoid fans or any moving parts in the engine compartment at all times, even when the vehicles are turned off. 3. Turn off all electrical devices such as radios, lights, air condition ...