Hyundai Kona: System operation / Heating

1. Set the mode to the position.

2. Set the air intake control to the outside (fresh) air position.

3. Set the temperature control to the desired position.

4. Set the fan speed control to the desired speed.

5. If dehumidified heating is desired, turn the air conditioning system on.

• If the windshield fogs up, set the mode to the or position.

Operation Tips

Ventilation
1. Set the mode to the position. 2. Set the air intake control to the outside (fresh) air position. 3. Set the temperature control to the desired position. 4. Set the fan speed control to the desired ...

Air conditioning
HYUNDAI Air Conditioning Systems are filled with R-134a or R-1234yf refrigerant. 1. Start the engine. Push the air conditioning button. 2. Set the mode to the position. 3. Set the air intake control ...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: Components and components location
Components 1. Front pillar trim 2. Front door scuff trim 3. Rear pillar trim 4. Rear door scuff trim 5. Cowl side trim 6. Center pillar lower trim 7. Center pillar upper trim ...

Hyundai Kona (OS) 2018-2021 Service Manual: Battery Repair procedures
Removal Battery 1. Turn the ignition switch OFF. 2. Disconnect the battery (-) terminal (A). Battery (-) terminal mountingnuts : 7.8 - 9.8 N.m (0.8 - 1.0 kgf.m, 5.8 - 7.2 lb-ft) ...

© 2018-2021 www.hkona.com