1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
Hyundai Kona (OS) 2018-2021 Service Manual: Temperature Control Actuator Description and operation
Description
The temperature control actuator is located at the heater unit. It regulates
the temperature by the procedure as follows.
The signal from the control unit adjusts the position of the temperature
door by operating the temperature switch. Then the tempe ...
Hyundai Kona (OS) 2018-2021 Service Manual: Rear Bumper Cover Repair procedures
Replacement
•
Put on gloves to prevent hand injuries.
•
Wh ...