Hyundai Kona: Lighting System / High Mounted Stop Lamp Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the spoiler assembly.
(Refer to Body - "tailgate trim")
3.
Remove the high mounted stop lamp assembly after loosening the mounting screws
  
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

Installation
1.
Install the rear high mounted stop lamp.
2.
Install the package tray trim.
3.
Connect the negative (-) battery terminal.
License Lamps Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the license lamp (A) after loosening the license lamp ...

Rear Combination Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the outside rear combination lamp assembly after disc ...

Other information:

Hyundai Kona (OS) 2018-2020 Service Manual: Alternator Description and operation
Description The Alternator has eight built-in diodes, each rectifying AC current to DC current. Therefore, DC current appears at alternator "B" terminal. In addition, the charging voltage of this alternator is regulated by the battery voltage detection system. ...

Hyundai Kona (OS) 2018-2020 Service Manual: SRSCM Components and components location
Components 1. Front right Pressure Impact Sensor (FIS) 2. Supplemental Restraint System Control Module (SRSCM) 3. Front left Pressure Impact Sensor (FIS) 4. Pressure Side Impact Sensor (P-SIS 5. Gravity Side Impact Sensor (G-SIS) ...

© 2018-2020 www.hkona.com