Hyundai Kona: ISG (Idle Stop & Go) System / Hood Switch Repair procedures
| Inspection |
| 1. |
Disconnect the hood switch connector (A).
|
| 2. |
Check for continuity between terminals.
|
Hood Switch Description and operation
Description
The hood switch is included as the influencing factors in the calculation of
the ISG function. If the hood is open, the engine must not be started or stopped
by the I ...
Other information:
Hyundai Kona (OS) 2018-2026 Service Manual: Exhaust Gas Temperature Sensor (EGTS) Description and operation
Description
Installed in exhaust manifold, the Exhaust Gas Temperature Sensor (EGTS) #1
for WGT senses the temperature of exhaust gas flowing into the WGT.
Installed in Gasoline Particulate Filter (GPF) assembly, the Exhaust Gas Temperature
Sensor (EGTS) #2 for GPF senses t ...
Hyundai Kona (OS) 2018-2026 Owners Manual: To decrease Cruise Control speed
Push the toggle switch down (SET-) and hold it.Your vehicle will gradually
slow down. Release the toggle switch at the speed you want to maintain.
Push the toggle switch down (SET-) and release it immediately. The cruising
speed will decrease 2.0 km/h (1.2 mph) each time the toggle switch is ...
