Hyundai Kona: ISG (Idle Stop & Go) System / Hood Switch Description and operation

Description
The hood switch is included as the influencing factors in the calculation of the ISG function. If the hood is open, the engine must not be started or stopped by the ISG function for safety reasons.
Seat Belt Switch Repair procedures
Inspection 1. Remove the connector from the switch. 2. Check for continuity between terminals. Seat belt condi ...

Hood Switch Repair procedures
Inspection 1. Disconnect the hood switch connector (A). 2. Check for continuity between terminals. ...

Other information:

Hyundai Kona (OS) 2018-2020 Service Manual: Front Driveshaft Repair procedures
Removal [Gamma 1.6 T-GDI, Nu 2.0 MPI] 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from the front hub. Tightenin ...

Hyundai Kona (OS) 2018-2020 Service Manual: ABS Control Module Repair procedures
Removal 1. Turn the ignition switch OFF and then disconnect the negative (-) battery cable. 2. Separate the intercooler inlet hose (A) from the turbocharger and then remove the inter cooler inlet pipe (B). [Gasoline 1.6 T-GDI] ...

© 2018-2020 www.hkona.com