Hyundai Kona: Hood / Hood Weatherstrip Repair procedures
Hyundai Kona (OS) 2018-2026 Service Manual / Body (Interior and Exterior) / Hood / Hood Weatherstrip Repair procedures
| Replacement |
| 1. |
Remove the hood weatherstrip (A).
|
| 2. |
To install, reverse removal procedure.
|
Hood Insulator Pad Repair procedures
Replacement
1.
Using a clip remover, remove the clips and then the hood insulator pad
(A).
...
Hood Latch Release Handle Components and components location
Component Location
1. Hood latch release handle
...
Other information:
Hyundai Kona (OS) 2018-2026 Service Manual: Idler Repair procedures
Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Dreve Belt")
2.
Remove the idler (A).
Tightening torque :
42.2 - 53.9 N.m (4.3 - 5.5 kgf.m, 31.1 - 39.8 ...
Hyundai Kona (OS) 2018-2026 Service Manual: Alternator Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the battery negative (-) battery.
2.
Disconnect the alternator "B" terminal (A) after loosening the mounting
nut.
3.
Disconnect the alte ...
© 2018-2026 www.hkona.com
