Hyundai Kona: Hood / Hood Latch Release Handle Components and components location
Hyundai Kona (OS) 2018-2023 Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle Components and components location
| Component Location |
| 1. Hood latch release handle |
Hood Weatherstrip Repair procedures
Replacement
1.
Remove the hood weatherstrip (A).
•
...
Hood Latch Release Handle Repair procedures
Replacement
1.
Using a socket (B), remove the hood release handle (A).
2.
To install, reverse removal procedure.
...
Other information:
Hyundai Kona (OS) 2018-2023 Service Manual: Sub Frame Repair procedures
Removal
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from the front hub.
Tightening torque :
107.9 - 12 ...
Hyundai Kona (OS) 2018-2023 Service Manual: Battery Sensor Repair procedures
Removal
1.
Disconnect the battery negative (-) cable.
2.
Turn the ignition switch OFF.
3.
Disconnect the battery (-) terminal (A).
Battery negative (-) terminal tightening nut :
...
© 2018-2023 www.hkona.com
