Hyundai Kona: Driving your vehicle / Ignition switch
To reduce the risk of SERIOUS INJURY or DEATH, take the following precautions:
- NEVER allow children or any person who is unfamiliar with the vehicle to touch the ignition switch or related parts. Unexpected and sudden vehicle movement can occur.
- NEVER reach through the steering wheel for the ignition switch, or any other control, while the vehicle is in motion. The presence of your hand or arm in this area may cause a loss of vehicle control resulting in an accident.
Before driving
Before entering the vehicle
Be sure all windows, outside mirror( s), and outside lights are clean
and unobstructed.
Remove frost, snow, or ice.
Visually check the tires for uneven wear and damag ...
Key ignition switch
Whenever the front door is opened, the ignition switch will illuminate, provided
the ignition switch is not in the ON position. The light will go off immediately
when the ignition switch is turned ...
Other information:
Hyundai Kona (OS) 2018-2020 Service Manual: Rear Wheel Speed Sensor Repair procedures
Removal
[Tortion Beam Axle Type]
1.
Turn the ignition switch OFF and then disconnect the negative (-) battery
cable.
2.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
...
Hyundai Kona (OS) 2018-2020 Service Manual: Repair procedures
Teaching Procedures
1.
Key Teaching Procedure
Key teaching must be done after replacing a defective PCM(ECM) or
when providing additional keys to the vehicle owner.
The procedure starts with an PCM(ECM) request for vehicle ...