Hyundai Kona: Driving your vehicle / Before driving

Before entering the vehicle

Before starting

WARNING

To reduce the risk of SERIOUS INJURY or DEATH, take the following precautions:

WARNING

NEVER drink or take drugs and drive.

Drinking or taking drugs and driving is dangerous and may result in an accident and SERIOUS INJURY or DEATH.

Drunk driving is the number one contributor to the highway death toll each year. Even a small amount of alcohol will affect your reflexes, perceptions and judgment. Just one drink can reduce your ability to respond to changing conditions and emergencies and your reaction time gets worse with each additional drink.

Driving while under the influence of drugs is as dangerous or more dangerous than driving under the influence of alcohol.

You are much more likely to have a serious accident if you drink or take drugs and drive. If you are drinking or taking drugs, don't drive. Do not ride with a driver who has been drinking or taking drugs. Choose a designated driver or call a taxi.

Driving your vehicle
Carbon monoxide (CO) gas is toxic. Breathing CO can cause unconsciousness and death. Engine exhaust contains carbon monoxide which cannot be seen or smelled. Do not inhale engine exhaust. If at any t ...

Ignition switch
To reduce the risk of SERIOUS INJURY or DEATH, take the following precautions: NEVER allow children or any person who is unfamiliar with the vehicle to touch the ignition switch or related parts. ...

Other information:

Hyundai Kona (OS) 2018-2024 Owners Manual: Tire rotation
To equalize tread wear, HYUNDAI recommends that the tires be rotated every 12,000 km (7,500 miles) or sooner if irregular wear develops. During rotation, check the tires for correct balance. When rotating tires, check for uneven wear and damage. Abnormal wear is usually caused by incorrect tire p ...

Hyundai Kona (OS) 2018-2024 Service Manual: Front Wheel Transfer Assembly Repair procedures
Removal 1. Remove the following items. (Refer to Suspension System - "Sub Frame") 2. Remove the propeller shaft (A). Tightening torque : 49.0 - 63.7 N.m (5.0 - 6.5 kgf.m, 36.1 - 47. ...

© 2018-2024 www.hkona.com