Hyundai Kona: Trip computer and service reminder (for cluster type A) / Service reminder
.png)
If the remaining mileage or days is below 1,500 km or 30 days, the service reminder will be displayed with a warning sound for a few seconds each time you turn the ignition switch to the ON position.
Information
To change or deactivate the service interval, consult an authorized HYUNDAI dealer.
.png)
If one of the specified service interval (mileage or days) reaches “0”, the service
symbol (.png)
) will blink for a few seconds
each time you turn ON the vehicle.
.png)
If you exceed the specified service interval, the service symbol ()
will blink for a few seconds each time you turn ON the vehicle.
To reset the service interval, press the RESET button for more than 5 seconds and then when the km (miles) and days blink press the RESET button for more than 1 second.
If the service interval is not set, the service symbol ()
will not be displayed.
Digital speedometer ON/OFF
The digital speedometer can be turned on and off.
To turn on the digital speedometer, press the RESET button on the steering wheel
for more than one second when “SPEED OFF” is displayed. To turn ...
Trip computer (type B, type C)
The trip computer is a microcomputer- controlled driver information system that
displays information related to driving.
Information
Some driving information stored in the trip computer (for example ...
Other information:
Hyundai Kona (OS) 2018-2026 Service Manual: Rail Pressure Sensor (RPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine speed.
Condition
Output Voltage (V)
...
Hyundai Kona (OS) 2018-2026 Service Manual: Roof Trim Assembly Repair procedures
Replacement
•
Put on gloves to prevent hand injuries.
•
Wh ...
