Hyundai Kona: Airbag Module / Passenger Airbag (PAB) Module Description and operation

Hyundai Kona (OS) 2018-2021 Service Manual / Restraint / Airbag Module / Passenger Airbag (PAB) Module Description and operation

Description

The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash. The SRSCM determines if and when to deploy the PAB.

•	Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using a specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.

Passenger Airbag (PAB) Module Components and components location

Components 1. Passenger Air Bag (PAB) ...

Passenger Airbag (PAB) Module Repair procedures

Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the glove box ho ...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: Alternator Description and operation
Description The Alternator has eight built-in diodes, each rectifying AC current to DC current. Therefore, DC current appears at alternator "B" terminal. In addition, the charging voltage of this alternator is regulated by the battery voltage detection system. ...

Hyundai Kona (OS) 2018-2021 Service Manual: Rear Disc Brake Components and components location
Components 1. Brake pad 2. Guide rod pin 3. Guide rod pin boot 4. Caliper carrier 5. Pad retainer 6. Brake pad 7. Pad return spring ...