Hyundai Kona: Dual Clutch Transmission Control System / Inhibitor Switch Components and components location

Components

1. Inhibitor switch
2. Manual control lever


Input shaft speed sensor 2 Repair procedures
Removal 1. Remove the cleaner assembly and air duct. (Refer to Engine Mechainical System - "Air Cleaner") 2. Disconnect t ...

Inhibitor Switch Description and operation
Description • Components location : DCT (Dual Clutch Transmission) • Function - The inhibitor switch mounted on the ...

Other information:

Hyundai Kona (OS) 2018-2021 Owners Manual: Good braking practices
WARNING Whenever leaving the vehicle or parking, always come to a complete stop and continue to depress the brake pedal. Move the shift lever into the P (Park) position, then apply the parking brake, and place the ignition switch in the LOCK/OFF position. Vehicles parked with the parking brake not ...

Hyundai Kona (OS) 2018-2021 Service Manual: Repair procedures
Replacement 1. Remove the plug hole (A). 2. Remove the cap and the nuts, and then remove the wiper arm (A). Tightening torque : 22.6 - 26.5 N.m (2.3 - 2.7 kgf.m, 16.6 - 19.5 lb-ft) ...

© 2018-2021 www.hkona.com