Hyundai Kona: Dual Clutch Transmission Control System / Input shaft speed sensor 1 Description and operation
Hyundai Kona (OS) 2018-2026 Service Manual / DCT (Dual Clutch Transmission) System / Dual Clutch Transmission Control System / Input shaft speed sensor 1 Description and operation
| Description |
| • |
Components location : DCT (Dual Clutch Transmission)
|
| • |
Function
The input shaft speed sensor is important in that it detects the input
shaft RPM and sends this information to the Transmission Control Module
(TCM).
It provides important input information for electric control.
The information is needed in all operations, including feedback control,
gear shift control and faliure detection of other sensors.
|
Input shaft speed sensor 1 Specifications
Specification
Item
Specification
Type
Hall effect sensor
Operation condition
-40 to 257°F (-40 to 125 ...
Input shaft speed sensor 1 Schematic diagrams
Circuit Diagram
...
Other information:
Hyundai Kona (OS) 2018-2026 Service Manual: Piston and Connecting Rod Components and components location
Components
1. Piston ring
2. Piston
3. Connecting rod
4. Connecting rod upper bearing
5. Connecting rod lower bearing
6. Connecting rod bearing cap
7. Piston pin
8. Snap ring
...
Hyundai Kona (OS) 2018-2026 Service Manual: Starter Repair procedures
Removal
1.
Disconnect the battery negative terminal.
2.
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
3.
Remove the vacuum pump.
(Refer to Bra ...
© 2018-2026 www.hkona.com
