Replacement |
|
1. |
Remove the ECM mirror cover (A).
|
2. |
Disconnect the ECM mirror connector (A).
|
3. |
Loosen the mounted screws and push the ECM mirror base upward to remove
the ECM mirror assembly (A).
|
4. |
To install, reverse removal procedure.
|
|
1. |
Loosen the inside rear view mirror mounting screw.
|
2. |
Loosen the mounted screws and push the ECM mirror base upward to remove
the ECM mirror assembly (A).
|
3. |
To install, reverse the removal procedure.
|
Hyundai Kona (OS) 2018-2021 Service Manual: Crankshaft Components and components location
Components
1. Crankshaft
2. Crankshaft upper bearing
3. Crankshaft lower bearing
4. Thrust bearing
5. Main bearing cap
6. Crankshaft sproket
7. Pilot bearing
8. CKPS wheel
...
Hyundai Kona (OS) 2018-2021 Service Manual: ETC (Electronic Throttle Control) System Repair procedures
Inspection
Throttle Position Sensor (TPS)
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output voltage of TPS 1 and 2 at C.T.
and W.O.T.
Specification : Refer t ...