Hyundai Kona: Warning and indicator lights / Low Beam Indicator Light

Turn Signal Indicator Light

This indicator light blinks: When you operate the turn signals. If any of the following occur, there may be a malfunction with the turn signal system. - The turn signal indicator light illuminate ...

High Beam Indicator Light

This indicator light illuminates: When the headlamps are on and in the high beam position. When the turn signal lever is pulled into the Flash-to-Pass position. ...

Other information:

Hyundai Kona (OS) 2018-2020 Service Manual: CVVT Oil Control Valve (OCV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV terminals 1 and 2. 4. Check that the resistance is within the spec ...

Hyundai Kona (OS) 2018-2020 Service Manual: ESP OFF Switch Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad ganish assembly (LH). (Refer to Body - "Main Crash Pade Assembly") 3. Disconnect the ...