Hyundai Kona: Engine Control System / Manifold Absolute Pressure Sensor (MAPS) Specifications

Hyundai Kona (OS) 2018-2026 Service Manual / Engine Control / Fuel System / Engine Control System / Manifold Absolute Pressure Sensor (MAPS) Specifications

Specification

Pressure [kPa (kgf/cm², psi)]	Output Voltage (V)
32.5 (0.33, 4.71)	0.5
284 (2.90, 41.19)	4.5

Manifold Absolute Pressure Sensor (MAPS) Description and operation

Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfer ...

Manifold Absolute Pressure Sensor (MAPS) Troubleshooting

Signal Waveform ...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: Troubleshooting
Troubleshooting Symptom Suspect Area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switch Inspect ignition lock switch, or replace as required Ignition coil ...

Hyundai Kona (OS) 2018-2026 Service Manual: Repair procedures
Operation and Leakage Check Check all of the following items : Component Procedure Brake Booster (A) Check brake operation by applying the brakes during a test drive. If the brakes do not work properly, check the brake boo ...