Hyundai Kona: Warning and indicator lights / Master Warning Light
.png)
This indicator light illuminates:
- When there is a malfunction in the below systems.
- Low washer fluid (if equipped)
- Exterior lamp malfunction (if equipped)
- Blind-Spot Collision Warning (BCW) malfunction (if equipped)
- Tire Pressure Monitoring System (TPMS, if equipped)
To identify the details of the warning, look at the LCD display.
Overspeed Warning Light
This warning light blinks:
When you drive the vehicle more than 120 km/h.
- This is to prevent you from driving your vehicle with overspeed. - The overspeed
warning chime also sound for approxima ...
Low Tire Pressure Warning Light
This warning light illuminates:
When you set the ignition switch or Engine Start/Stop button to the ON
position. - It illuminates for approximately 3 seconds and then goes off.
When one or more ...
Other information:
Hyundai Kona (OS) 2018-2022 Service Manual: CVVT Oil Control Valve (OCV) Description and operation
Description
Continuous Variable Valve Timing (CVVT) system advances or retards the valve
timing of the intake and exhaust valve in accordance with the ECM control signal
which is calculated by the engine speed and load.
By controlling CVVT, the valve over-lap or under-lap o ...
Hyundai Kona (OS) 2018-2022 Service Manual: Input shaft speed sensor 2 Repair procedures
Removal
1.
Remove the cleaner assembly and air duct.
(Refer to Engine Mechainical System - "Air Cleaner")
2.
Disconnect the Input shaft speed sensor connector (A).
3.
Remove the battery and ba ...
