Replacement |
1. |
Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly")
|
2. |
Remove the sunroof sunshade.
(Refer to Sunroof - "Sunroof Sunshade")
|
3. |
Down the slide by pushing it and then remove the drip link assembly
(A).
|
4. |
Separate the drip link (B) and guide (A).
|
5. |
Remove the shoe (A).
|
6. |
Separate the guide assembly (A) and the cable (B) by pushing them in
the direction of the arrow.
|
7. |
To install, reverse the removal procedure.
|
Hyundai Kona (OS) 2018-2023 Service Manual: Rear torsion beam axle Repair procedures
Removal
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear wheel and tire (A) from front hub.
Tightening torque :
107.9 - 127.5 N ...
Hyundai Kona (OS) 2018-2023 Service Manual: Components and components location
Component Location
1. Head lamp leveling unit
2. Head lamp leveling actuator
(Built - in Head lamp)
...