| Inspection |
| 1. |
Disconnector the negative (-) battery terminal.
|
| 2. |
Remove the overhead console lamp.
(Refer to Body Electrical System - "Overhead Console Lamp")
|
| 3. |
Remove the overhead console cover after loosening the screws.
|
| 4. |
Check the continuity of between terminals.
|
AUX jack Repair procedures
Smart Key SystemHyundai Kona (OS) 2018-2026 Service Manual: Front Wheel Speed Sensor Repair procedures
Removal
1.
Turn the ignition switch OFF and then disconnect the negative (-) battery
cable.
2.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
3.
Remove t ...
Hyundai Kona (OS) 2018-2026 Service Manual: Condenser Repair procedures
Inspection
1.
Check the condenser fins for clogging and damage. If clogged, clean
them with water, and blow them with compressed air. If bent, gently
bend them using a screwdriver or pliers.
2.
Check the cond ...