Hyundai Kona: Parking Distance Warning (Reverse/Forward) system / Parking Distance Warning (Reverse/Forward) system precautions

Hyundai Kona (OS) 2018-2020 Owners Manual / Convenient features of your vehicle / Driver assist system / Parking Distance Warning (Reverse/Forward) system / Parking Distance Warning (Reverse/Forward) system precautions

The Parking Distance Warning (Reverse/Forward) system may not sound consistently depending on the speed and shapes of the objects detected.
The Parking Distance Warning (Reverse/Forward) system may malfunction if the vehicle bumper height or sensor installation has been modified or damaged. Any non-factory installed equipment or accessories may also interfere with the sensor performance.
The sensor may not recognize objects less than 30 cm (11 in.) from the sensor, or it may sense an incorrect distance. Use caution.
When the sensor is frozen or stained with snow, dirt, or water, the sensor may be inoperative until the stains are removed using a soft cloth.
Do not push, scratch or strike the sensor. Sensor damage could occur.
Do not spray the sensors or its surrounding area directly with a high pressure washer. Shock applied from high pressure water may cause the device to not operate normally.

Non-operational conditions of Parking Distance Warning (Reverse/Forward) system

Parking Distance Warning (Reverse/Forward) system may not operate normally when: Moisture is frozen to the sensor. Sensor is covered with foreign matter, such as snow or water, or the sensor cove ...

Defroster

NOTICE To prevent damage to the conductors bonded to the inside surface of the rear window, never use sharp instruments or window cleaners containing abrasives to clean the window. Information If yo ...

Other information:

Hyundai Kona (OS) 2018-2020 Owners Manual: Lighting control
To operate the lights, turn the knob at the end of the control lever to one of the following positions: (1) O position (2) AUTO light position (if equipped) (3) Position lamp position (4) Headlamp position AUTO light position When the light switch is in the AUTO position, the position lamp and h ...

Hyundai Kona (OS) 2018-2020 Service Manual: Starter Relay Repair procedures
Inspection 1. Turn ignition switch OFF and disconnect the battery negative (-) terminal. 2. Remove the fuse box cover. 3. Remove the starter relay (A). 4. Check for continui ...