Inspection |
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the front door quadrant inner cover (A).
|
3. |
Disconnect the power door mirror connector from the harness.
|
4. |
Apply battery voltage to each terminal as shown in the table and
verify that the mirror operates properly.
[Mirror Control (LH/RT)]
[BCW Indicator]
[Mirror Heater]
[Side Repeater Lamp]
[Mirror Fording Motor]
|
Hyundai Kona (OS) 2018-2021 Service Manual: Rear Seat Latch Repair procedures
Replacement
[LH]
•
When prying with a flat-tip screwdriver or use a prying trim
tool, wrap it with protective tape, and apply protective tape
around the relat ...
Hyundai Kona (OS) 2018-2021 Service Manual: DC/DC Converter Components and components location
Component Location
1. DC/DC Converter [450W]
2. DC/DC Converter
[200W]
...