Hyundai Kona: Blower / Power Mosfet Description and operation

Description
It is installed to the DATC and adjusts the fan rpm by precisely controlling the voltage applied to the blower motor.
Blower Motor Repair procedures
Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not ...

Power Mosfet Repair procedures
Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the b ...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: Evaporator Temperature Sensor Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure the resistance between terminal "+" and "-" of t ...

Hyundai Kona (OS) 2018-2021 Service Manual: CVVT Oil Control Valve (OCV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV terminals 1 and 2. 4. Check that the resistance is within the spec ...

© 2018-2021 www.hkona.com