Hyundai Kona: Heating, Ventilation and Air Conditioning / Blower
- Blower Unit Components and components location
- Blower Unit Repair procedures
- Blower Motor Repair procedures
- Power Mosfet Description and operation
- Power Mosfet Repair procedures
- Blower Resistor (Manual) Repair procedures
- Climate Control Air Filter Description and operation
- Climate Control Air Filter Repair procedures
- Intake Actuator Components and components location
- Intake Actuator Description and operation
- Intake Actuator Repair procedures
Auto Defoging Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the auto defogging connector.
3.
...
Blower Unit Components and components location
Component Location
1. Blower unit assembly
Components
1. Intake seal
2. Intake duct case
3 ...
Other information:
Hyundai Kona (OS) 2018-2025 Service Manual: Condenser Repair procedures
Inspection
1.
Check the condenser fins for clogging and damage. If clogged, clean
them with water, and blow them with compressed air. If bent, gently
bend them using a screwdriver or pliers.
2.
Check the cond ...
Hyundai Kona (OS) 2018-2025 Service Manual: Battery Sensor Repair procedures
Removal
1.
Disconnect the battery negative (-) cable.
2.
Turn the ignition switch OFF.
3.
Disconnect the battery (-) terminal (A).
Battery negative (-) terminal tightening nut :
...
В© 2018-2025 www.hkona.com
