Hyundai Kona: Blower / Intake Actuator Components and components location

Hyundai Kona (OS) 2018-2022 Service Manual / Heating, Ventilation and Air Conditioning / Blower / Intake Actuator Components and components location

Components Location

1. Intake actuator


Climate Control Air Filter Repair procedures
Replacement 1. Open the glove box (A) in the direction of the arrow. 2. Remove the stopper (B) from the glove ...

Intake Actuator Description and operation
Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will s ...

Other information:

Hyundai Kona (OS) 2018-2022 Owners Manual: Check tire pressure
You can check the tire pressure in the Assist mode on the cluster. Refer to the "LCD Display Modes" in chapter 3. Tire pressure is displayed after a few minutes of driving after initial engine start up. If tire pressure is not displayed when the vehicle is stopped, "Drive to display" mess ...

Hyundai Kona (OS) 2018-2022 Service Manual: Front Strut Assembly Repair procedures
Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from the front hub. Tightening torque : 107.9 - 12 ...

© 2018-2022 www.hkona.com