Hyundai Kona: Blower / Climate Control Air Filter Repair procedures

Replacement
1.
Open the glove box (A) in the direction of the arrow.

2.
Remove the stopper (B) from the glove box (A).

3.
Remove the filter cover (A) by pressing the knob.

4.
Replace the air filter (A) with a new one according to the direction of air filter.

  
To remove the filter easily, press the right side inward then pull out the filter.
In case of driving in an air-polluted area or rugged terrain, check and replace the air filter as frequently as possible.
5.
To install, reverse the removal procedure.
Climate Control Air Filter Description and operation
Description The climate control air filter is located in the blower unit. It eliminates foreign materials and odor. The particle filter performs a role as an odor filter ...

Intake Actuator Components and components location
Components Location 1. Intake actuator ...

Other information:

Hyundai Kona (OS) 2018-2025 Owners Manual: Emergency Stop Signal (ESS)
The Emergency Stop Signal system alerts the driver behind by blinking the stop lights, while sharply and severely braking. The system is activated when: The vehicle suddenly stops. (The deceleration power exceeds 7 m/s2, and the driving speed exceeds 55 km/h (34 mph).) The ABS is activated and ...

Hyundai Kona (OS) 2018-2025 Service Manual: Accelerator Position Sensor (APS) Specifications
Specification Accelerator Position Output Voltage (V) APS1 APS2 C.T 0.7 - 0.8 0.325 - 0.425 W.O.T 3.98 - 4.22 1.93 - 2.17 ...

© 2018-2025 www.hkona.com