Hyundai Kona: Engine Control System / Purge Control Solenoid Valve (PCSV) Description and operation

Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when the ECM grounds the valve control line. When the passage is open (PCSV ON), fuel vapor stored in the canister is transferred to the intake manifold.

Injector Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance betwee ...

Purge Control Solenoid Valve (PCSV) Specifications

Specification Item Specification Coil Resistance (Ω) 22.0 - 26.0 [20°C (68°F)] ...

Other information:

Hyundai Kona (OS) 2018-2024 Service Manual: Vacuum Pump Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Check the safty after uplift the vehicle with lift. 3. Remove the under cover. (Refer to Engine Mechanical System - ...

Hyundai Kona (OS) 2018-2024 Service Manual: Troubleshooting
Troubleshooting Problem Symptoms Table Before replacing or repairing air conditioning components, first determine if the malfunction is due to the refrigerant charge, air flow or compressor. Use the table below to help you find the cause of the probl ...