Hyundai Kona: Engine Control System / Rail Pressure Sensor (RPS) Schematic diagrams

Circuit Diagram

Harness Connector

Rail Pressure Sensor (RPS) Troubleshooting
Signal Waveform ...

Rail Pressure Sensor (RPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ...

Other information:

Hyundai Kona (OS) 2018-2021 Owners Manual: Prerequisite for activation
The FCA gets ready to be activated, when the FCA is selected on the LCD display, and when the following prerequisites are satisfied. - The ESC (Electronic Stability Control) is on. - Vehicle speed is over 10 km/h (6 mph). (The FCA is only activated within a certain speed range.) - The system dete ...

Hyundai Kona (OS) 2018-2021 Owners Manual: Rear fog lamp
Vehicle with front fog lamp To turn on the rear fog lamp: Position the light switch in the position lamp position, turn the light switch (1) to the front fog lamp position, and then turn the light switch (1) to the rear fog lamp position. To turn the rear fog lamps off, do one of the following: ...

© 2018-2021 www.hkona.com