Hyundai Kona: Fuel Filler Door / Repair procedures

Replacement
  
Put on gloves to prevent hand injuries.
  
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
1.
Open the fuel filler door (A).

2.
Loosen the mounting bolts, remove the fuel filler door (A).

3.
To install, reverse removal procedure.
  
Make sure the fuel filler door locks/unlocks and opens/closes properly.
Replace any damaged clips (or pin-type retainers).
Components and components location
Component Location 1. Fuel filler door ...

Front Door
...

Other information:

Hyundai Kona (OS) 2018-2020 Service Manual: Front Washer Motor Repair procedures
Inspection Front Washer Motor 1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water.    ...

Hyundai Kona (OS) 2018-2020 Service Manual: Rear Coil Spring Repair procedures
Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wheel and tire (A) from front hub. Tightening torque : 107.9 - 127.5 N ...

© 2018-2020 www.hkona.com