| Removal |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the front bumper.
(Refer tor Body - "Front Bumper")
|
| 3. |
Disconnect the DRL connector.
|
| 4. |
Remove the DRL from the vehicle.
|
| Installation |
| 1. |
Install the DRL .
|
| 2. |
Install the front bumper.
|
| 3. |
Connect the negative (-) battery terminal.
|
Hyundai Kona (OS) 2018-2026 Service Manual: Battery Sensor Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-)
cable.
Battery negative (-) terminal tightening nut :
7.8 - 9.8 N.m (0.8 - 1.0 kgf.m, 5.8 - 7.2 lb-ft)
...
Hyundai Kona (OS) 2018-2026 Owners Manual: DCT warning messages
This warning message is displayed when vehicle is driven slowly on a grade and
the vehicle detects that the brake pedal is not applied.
Steep grade
Driving up hills or on steep grades:
To hold the vehicle on an incline use the foot brake or the parking brake.
When in stop-and-go traffic on an i ...