Hyundai Kona: Seat Electrical / Seat Heater Switch Repair procedures

Removal
[Front Seat]
1.
Disconnect the negative (-) battery terminal.
2.
Remove the floor console assembly.
(Refer to Body - "Floor Console Assembly")

Installation
[Front Seat Heater Switch]
1.
Install the floor consol assembly.
2.
Connect the negative (-) battery terminal.
Seat Heater Switch Schematic diagrams
Circuit Diagram [Front Seat Heater Switch (Driver)] [Front Seat Heater Switch (Passenger)] ...

Air Ventilation Seat Components and components location
Component Location [Front Ventilation Seat] 1. Ventilation seat unit (Assist seat only) 2. Ventilation seat blower ...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: Rail Pressure Sensor (RPS) Description and operation
Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor converts the pressure to voltage signal. By using this signal, the ECM ...

Hyundai Kona (OS) 2018-2021 Service Manual: Specifications
Specification Item Specification Power source 3V Operating temperature -10°C ~ to 60°C (14°F to 140°F) RF Modulation FSK ...

© 2018-2021 www.hkona.com