Hyundai Kona: Airbag Module / Side Airbag (SAB) Module Description and operation

Hyundai Kona (OS) 2018-2026 Service Manual / Restraint / Airbag Module / Side Airbag (SAB) Module Description and operation

Description

The Side Airbags (SAB) are installed inside the front seat and protects the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of side airbag by using Side Impact Sensor (SIS) signal.

•	Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.

Side Airbag (SAB) Module Components and components location

Components 1. Side Air Bag (SAB) ...

Side Airbag (SAB) Module Repair procedures

Removal • The side airbag cannot be disassembled from the seat back assembly, ...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: Input shaft speed sensor 1 Repair procedures
Removal 1. Remove the cleaner assembly and air duct. (Refer to Engine Mechainical System - "Air Cleaner") 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") ...

Hyundai Kona (OS) 2018-2026 Service Manual: Description and operation
Description The Dual Clutch Transmission (DCT) control system measures required data to identify the state of the control target and computes the appropriate compensation value if adjustment is necessary. The actuator is controlled according to the computed compensation valu ...