Hyundai Kona: Heating, Ventilation and Air Conditioning / Specifications

Specification
Air Conditioner
item
Specification
Compressor
Type
6VSx12
Oil type & Capacity
PAG 30 120 ± 10cc (4.23 ± 0.34oz.)
Displacement
140 cc / rev
Pulley type
6PK - TYPE
Expansion valve
Type
Block type
Refrigerant
Type
R - 134a
R - 1234yf
Capacity
500 ± 25 g (17.6 ± 0.88 oz.)
450 ± 25g (15.9 ± 0.88oz.)

Blower Unit
Item
Specification
Fresh and recirculation
Operating method
Actuator
Blower
Type
Sirocco pan
Speed step
Auto + 8 speed (Automatic), 1 - 4 speed (Manual)
Speed control
Power mosfet (Automatic), Resistor (Manual)
Air filter
Type
Particle filter

Heater and Evaporator Unit
Item
Specification
Heater
Type
Fin & Tube type
Type
Tube - Fin 1Way
Mode operating method
Actuator
Temperature operating method
Actuator
Evaporator
Temperature control type
Evaporator temperature sensor
Blower singular
A/C Output OFF Temperature
A/C Output ON Temperature
Manual control
0.5 °C (32.9 °F)
1.5 °C (34.7 °F)
Dual control
0.5 °C (32.9 °F)
1.5 °C (34.7 °F)
Manufacturer
DOOWON

Tightening Torques
Items
N.m
kgf.m
lb-ft
Compressor
20.0 - 32.95
2.04 - 3.36
14.75 - 24.30
Condenser - Discharge hose
8.8 - 13.7
0.9 - 1.4
6.5 - 10.1
Condenser - Liquid tube
Compressor - Discharge hose
21.6 - 32.4
2.2 - 3.3
15.9 - 23.9
Compressor - Suction hose
Expansion valve - Evaporator
8.8 - 13.7
0.9 - 1.4
6.5 - 10.1

Heating, Ventilation and Air Conditioning
...

Troubleshooting
Troubleshooting Problem Symptoms Table Before replacing or repairing air conditioning components, first determine if the malfunction is due to the refrigera ...

Other information:

Hyundai Kona (OS) 2018-2021 Owners Manual: Accumulated Info display
This display shows the accumulated trip distance (1), the average fuel economy (2), and the total driving time (3). The information is accumulated starting from the last reset. To manually reset the information, press and hold the OK button when viewing the Accumulated driving info. The trip dist ...

Hyundai Kona (OS) 2018-2021 Service Manual: Front Impact Sensor (FIS) Description and operation
Description • The front impact sensors (FIS) are installed on the upper of the side panel in Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at their mounting locations. • The pri ...

© 2018-2021 www.hkona.com