Hyundai Kona: Suspension System (NON-ECS) / Specifications
Hyundai Kona (OS) 2018-2026 Service Manual / Suspension System (NON-ECS) / Specifications
| Specifications |
Front Suspension
|
Item |
Specification |
|
|
Suspension type |
MacPherson Strut |
|
|
Shock absorber |
Type |
Gas |
Rear Suspension
|
Item |
Specification |
|
|
Suspension type |
Torsion Axle |
|
|
Shock absorber |
Type |
Gas |
Wheel & Tire
|
Item |
Specification |
|
|
Steel |
6.5J * 16 |
|
|
Aluminum |
6.5J * 16 |
|
|
7.0J * 17 |
||
|
7.5J * 18 |
||
|
Tire |
205/60 R16 |
|
|
215/55 R17 |
||
|
235/45 R18 |
||
|
Tire pressure |
205/60 R16 |
2.3 + 0.07 kg/cm² (33 + 1.0 psi) |
|
215/55 R17 |
||
|
235/45 R18 |
||
Wheel Alignment
|
Item |
Specification |
||
|
Front |
Rear |
||
|
Toe-in |
Individual |
0.06° ± |
0.15° |
|
Total |
0.12° ± 0.3° |
0.3° ± 0.4° |
|
|
Camber angle |
-0.5° ± 0.6° |
-1.2° ± 0.6° |
|
|
Caster angle |
4.5° ± 0.6° |
- |
|
|
King - pin angle |
13.9° ± 0.5° |
- |
|
|
Ride height |
403 ± 10 mm (15.86 ± 0.4 Inch) |
410 ± 10 mm (16.14 ± 0.4 Inch) |
|
| Tightening torque |
Front Suspension
|
Item |
Tightening torque (kgf.m) |
||
|
N.m |
Kgf.m |
lb-ft |
|
|
Hub nuts |
107.9 - 127.5 |
11.0 - 13.0 |
79.6 - 94.0 |
|
Lower arm to sub frame (Front) |
117.7 - 137.3 |
12.0 - 14.0 |
86.6 - 101.3 |
|
Lower arm to sub frame (Rear) |
156.9 - 176.5 |
16.0 - 18.0 |
115.7 - 130.2 |
|
Lower arm to knuckle |
58.8 - 70.6 |
6.0 - 7.2 |
43.4 - 52.1 |
|
Tie rod end castle nut |
24.5 - 34.3 |
2.5 - 3.5 |
18.1 - 25.3 |
|
Steering gear box to sub frame |
88.3 - 107.9 |
9.0 - 11.0 |
65.1 - 79.6 |
|
Stabilizer bar to stabilizer link |
98.1 - 117.7 |
10.0 - 12.0 |
72.3 - 86.8 |
|
Stabilizer bracket mounting bolts |
44.1 - 53.9 |
4.5 - 5.5 |
32.5 - 39.8 |
|
Stabilizer link to strut assembly |
98.1 - 117.7 |
10.0 - 12.0 |
72.3 - 86.8 |
|
Strut assembly to knuckle |
156.9 - 176.5 |
16.0 - 18.0 |
115.7 - 130.2 |
|
Strut assembly to frame |
53.9 - 73.5 |
5.5 - 7.5 |
39.8 - 54.2 |
|
Strut assembly self locking nut |
98.1 - 107.9 |
10.0 - 11.0 |
72.3 - 79.6 |
|
Universal joint to pinion of steering gear |
32.4 - 37.3 |
3.3 - 3.8 |
23.8 - 27.5 |
|
Sub frame mounting bolt and nut |
176.5 - 196.1 |
18.0 - 20.0 |
130.2 - 144.7 |
|
Sub frame bracket stay mounting bolts |
44.1 - 53.9 |
4.5 - 5.5 |
32.5 - 39.8 |
|
Roll rod mounting bolt & nut |
107.9 - 127.5 |
11.0 - 13.0 |
79.6 - 94.0 |
|
49.0 - 63.7 |
5.0 - 6.5 |
36.2 - 47.0 |
|
Rear Suspension
|
Item |
Tightening torque (kgf.m) |
||
|
N.m |
kgf.m |
lb-ft |
|
|
Hub nuts |
107.9 - 127.5 |
11.0 - 13.0 |
79.6 - 94.0 |
|
Shock absorber to body |
49.0 - 63.7 |
5.0 - 6.5 |
36.2 - 47.0 |
|
Shock absorber to torsion beam axle |
98.1 - 117.7 |
10.0 - 12.0 |
72.3 - 86.8 |
|
Torsion beam axle to stay |
98.1 - 117.7 |
10.0 - 12.0 |
72.3 - 86.8 |
|
Torsion beam axle stay to frame |
98.1 - 117.7 |
10.0 - 12.0 |
72.3 - 86.8 |
Special service tools
Special Service Tools
Tool (Number and Name)
IIIustration
Use
09546-3X100
Shock absorber lock nut removal tool
...
Other information:
Hyundai Kona (OS) 2018-2026 Service Manual: Intake Manifold Repair procedures
Removal and Installation
1.
Remove the engine cover.
(Refer to Engine and Transaxle Assembly - "Engine Cover")
2.
Disconnect the battery negativce terminal.
3.
Disconnect the engine wiring con ...
Hyundai Kona (OS) 2018-2026 Service Manual: Fuel Filler Cap Description and operation
Description
A ratchet tightening device on the threaded fuel filler cap reduces the chances
of incorrect installation, which would seal the fuel filler. After the gasket
on the fuel filler cap and the filler neck flange contact each other, the ratchet
produces a loud clickin ...
© 2018-2026 www.hkona.com
