Hyundai Kona: Suspension System (NON-ECS)
Hyundai Kona (OS) 2018-2020 Service Manual / Suspension System (NON-ECS)
- Specifications
- Special service tools
- Troubleshooting
- Front Suspension System
- Components and components location
- Front Strut Assembly Components and components location
- Front Strut Assembly Repair procedures
- Front Lower Arm Components and components location
- Front Lower Arm Repair procedures
- Front Stabilizer Bar Repair procedures
- Sub Frame Repair procedures
- Rear Suspension System
- Components and components location
- Rear Shock Absorber Components and components location
- Rear Shock Absorber Repair procedures
- Rear Coil Spring Components and components location
- Rear Coil Spring Repair procedures
- Rear torsion beam axle Components and components location
- Rear torsion beam axle Repair procedures
- Tires/Wheels
- Tire Pressure Monitoring System
Rear Differential Carrier Repair procedures
Removal
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear wheel and ...
Specifications
Specifications
Front Suspension
Item
Specification
Suspension type
MacPherson Strut
Shock absorber
...
Other information:
Hyundai Kona (OS) 2018-2020 Service Manual: Exhaust Manifold Components and components location
Components
1. Turbo manifold gasket
2. Turbo manifold module
3. Warm-up catalytic converter (WCC)
4. Warm-up catalytic converter (WCC) gasket
5. Oil feed pipe
6. Oil drain pipe
7. Exhaust manifold heat protector
8. Turbocharger water pipe ...
Hyundai Kona (OS) 2018-2020 Service Manual: Repair procedures
Inspection
ESP System Bleeding
This procedure should be followed to ensure adequate bleeding of air and filling
of the ESC unit, brake lines and master cylinder with brake fluid.
1.
Remove the reservoir cap and fill the brake reservoir with brake fluid.
...
© 2018-2020 www.hkona.com