Hyundai Kona: Suspension System (NON-ECS) / Tires/Wheels

Rear torsion beam axle Repair procedures

Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wheel and ...

Tire Repair procedures

   • Using tires and wheel other than the recommended sizes could cause unusual handling chara ...

Other information:

Hyundai Kona (OS) 2018-2024 Service Manual: Description and operation
Warning Lamp Activation Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a LED lamp check. The lamp shall turn on for 6 seconds during the initialization ...

Hyundai Kona (OS) 2018-2024 Service Manual: Engine Control Module (ECM) Repair procedures
Removal    • When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the case of installing used ECM] ...