Hyundai Kona: Key ignition switch / Starting the engine

WARNING

Starting the gasoline engine

Vehicle with manual transmission:

1. Make sure the parking brake is applied.

2. Make sure the shift lever is in neutral.

3. Depress the clutch and brake pedals.

4. Turn the ignition switch to the START position. Hold the key (maximum of 10 seconds) until the engine starts and release it.

Vehicle with dual clutch transmission:

1. Make sure the parking brake is applied.

2. Make sure the shift lever is in P (Park).

3. Depress the brake pedal.

4. Turn the ignition switch to the START position. Hold the key (maximum of 10 seconds) until the engine starts and release it.

Information

NOTICE

To prevent damage to the vehicle:

Key ignition switch positions
...

Engine Start/Stop button
Whenever the front door is opened, the Engine Start/Stop button will illuminate and will go off 30 seconds after the door is closed. WARNING To turn the engine off in an emergency: Press and hold th ...

Other information:

Hyundai Kona (OS) 2018-2022 Service Manual: Description and operation
Description MDPS (Motor Dirven Power Steering) system uses an electric motor to assist the steering force and it is an engine operation independent steering system. MDPS control module controls the motor operation according to information received from the each sensor and ...

Hyundai Kona (OS) 2018-2022 Service Manual: Description and operation
Description Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are pre-pro grammed in the memory of the ECM (Engine Control Module). The engine operating conditio ...

© 2018-2022 www.hkona.com