Hyundai Kona: ISG (Idle Stop and Go) system / To activate the ISG system

ISG (Idle Stop and Go) system
The ISG system is to reduce the fuel consumption by automatically shutting down the engine, when the vehicle is at a standstill (i.e. red stop light, stop sign, and traffic jam). The engine is autom ...

Prerequisite for activation
The ISG system operates in the following situations. - The driver's seatbelt is fastened. - The driver's door and the hood are closed. - The brake vacuum pressure is adequate. - The battery is suffic ...

Other information:

Hyundai Kona (OS) 2018-2020 Service Manual: Fuel Pressure Sensor (FPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Check the output voltage of fuel pressure sensor (FPS). Pressure [kPa (kgf/cm², psi)] Output Voltage (V) 50 (0. ...

Hyundai Kona (OS) 2018-2020 Service Manual: Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV terminals 1 and 2. 4. Check that the resistance is within the sp ...

© 2018-2020 www.hkona.com